Titan Attachments 191569, Руководство оператора

Страница: 5 / 23

5
2 USAGE INSTRUCTION
Carefully read all the instructions before using the machine.
2.1 Before Use & Adjustments
Before mounting the Sickle Bar Mower make sure that all blades, nuts & bolts are properly secured.
This implement is to be used with tractor with PTO at 540 RPM and clockwise rotation.
Also determine Operate the implement up and down steep slopes, not across slopes, to prevent the
tractor from tipping. Avoid sudden stops and starts; slow down before changing directions on a
slope. Before starting a mowing session, adjust the machine so that the best working setup is
obtained. Correct machine setup guarantees excellent mowing, allows for the best machine-tractor
performance, and remarkably reduces wear of the cutting blades.
CAUTION: Always ensure that the coupling of the implement with the tractor is done at the same
PTO speed and direction of rotation. Do not operate this implement at a PTO speed or direction of
rotation other than that shown on the implement. Serious damage can occur to the machine
and/or the operator.
CAUTION: Right hand and left-hand sides of the implement are determined by facing in the
direction the implement will travel when going forward.
1. CAUTION: Avoid injury. Proper ballasting is required for safe operation of your sickle bar
mower.
2. Place the mower duly leveled on the flat piece of land.
3. Reverse the tractor to the mower (Do not drag mower up the tractor).
4. Attached the lift are of the tractor to the mower first.
5. Reverse the tractor to the mower (Do not drag mower up the tractor). Attached the lift are of
the tractor to the mower first.
6. After attaching the tractor, lift it and adjust the control arm parallel to the grovel. When you
look from both rear & sideways, all the cutting arm of the mower should be parallel to the
ground.