Titan Attachments 191569, Руководство оператора

Страница: 12 / 23

12
TRANSPORT ON ROAD
1. When driving on public roads, be sure to follow the highway code of the country involved.
2. Any transport accessories must be provided with suitable signs and guards.
3. It is very important to remember that road holding capacity as well as direction and braking
capacity can be influenced, sometimes considerably by equipment being either carried or
towed.
4. When negotiating curves, be aware of the variation in centrifugal force exerted in a position
other than that of the center of gravity, with and without the equipment in tow. Also pay
greater attention on sloping roads or ground.
5. For transport, adjust and fasten the lateral lifting arm chains of the tractor; lock the hydraulic
listing control lever.
6. For displacements beyond the work area. The equipment must be placed in the
transportation position.
7. Upon request the Manufacturer will supply supports and tables for signaling of dimensions.
8. When the dimensions of carried or partially carried equipment conceal the tractor's signaling
and lighting devices, these must also be installed on the equipment itself, in conformity with
regulations of the highway code of the country involved. When in operation make sure that
the lighting system is in perfect working order.
SERVICE AND MAINTENANCE
b. Operation, Care & Maintenance of Sickle Bar Mower
1. Good maintenance is your responsibility.
2. Keep service area clean and dry. Be sure electrical outlets and tools are properly grounded.
Use adequate light for the job at hand.
3. Make sure there is plenty of ventilation. Never operate the engine of the towing vehicle in a
closed building. The exhaust fumes may cause asphyxiation.
4. Make no repair or adjustments with the tractor engine running. Before working on the
machine, disengage the PTO, shut off the engine, set the brakes, and remove the ignition key.
5. Be certain all moving parts on attachment have come to a complete stop before attempting
to perform maintenance.
6. Never work under equipment unless it is blocked securely.
7. Always use personal protection devices such as eye, hand and hearing protectors, when
performing any service or maintenance.
8. Frequently check mower blades. They should be sharp, free of nicks and cracks and securely
fastened.
9. Periodically tighten all bolts, nuts and screws and check that all cotter pins are properly
installed to ensure unit is in a safe condition.
10. When completing a maintenance or service function, make sure all safety shields and devices
are installed before placing unit in service.