Titan Attachments 191569, Руководство оператора

Страница: 11 / 23

11
use are in perfect working order.
7. Before starting up the equipment, check the area surrounding the machine to ensure that
there are no people, nearly (especially children or pets) and ensure that you have excellent
visibility.
8. Use suitable clothing. Avoid loose clothing or garments with parts that could in any way get
caught in the rotating or moving parts of the machine.
9. Only start working with the equipment if all the protective devices are in perfect condition,
installed and in the safe position.
10. 10)It is absolutely prohibited to stand within the machine’s radius of action where there are
moving parts. 11)Before starting work, familiarize yourself with the control devices and their
functions.
11. 12)The driver’s seat must never be left when the tractor engine is running.
12. 13)It is absolutely forbidden to use the equipment without the guards and container covers.
13. 14)Before leaving the tractor, lower the equipment hooked to the lifting unit, stop the
engine, pull the hand brake, and remove the key from the dashboard, make sure that the
chemical substances should be out of reach. 15)Before starting the equipment, check that
the supporting feet have been removed from under the machine; check that the machine has
been correctly assembled and regulated: check that the machine is in perfect working order,
and that all the parts subject to wear and tear are in good condition.
14. 16)Before releasing the equipment from the third point attachment, put the hoist command
lever into the locked position and lower the support feet.
15. 17)All operations must be carried out by expert personnel, equipped with protective gloves,
in a clean and dust-free environment.
TRACTOR HITCH
1. Hook the equipment to a suitable, sufficiently powered tractor by means of the appropriate
device (lifter), in conformity with applicable standards.
2. The class of the equipment attachment pins must be the same as that of the lifter
attachment.
3. Take care when working within the range of the lifting arms as this is a very dangerous area.
4. Be very careful when hooking and unhooking the equipment.
5. It is absolutely forbidden to stand in the space between the tractor and the equipment with
the engine running. It is possible to work between the tractor and the equipment only after
the parking brake has been applied and a suitably sized blocking wedge or stone has been
placed under the wheels.
6. The attaching- of additional equipment onto the tractor brings about a different distribution
of weight on the axles. Check the compatibility of the tractor performance with the weight
that the machine transfers onto the three - point linkage.
7. Comply with the maximum admissible weight for the axle, the total mobile weight, transport
regulations and the Highway Code.