Page
12
Electric Oven
User Manual
3 Button Digital Timer
Operation period
In order to set an operation period, the mode button has to be pressed repeatedly until the LED
L1 is flashing. Then the desired operation period (time frame between 0.01h and 10.00h) can be
set using the plus and minus buttons. Once adjusted, it will be stored after approx. 5 seconds,
the LED L1 remains illuminated steadily, and the set time starts running down. The display
reverts to the time-of-day. As soon as the operation period has ended, the relay opens and the
alarm signal sounds (4 beeps every 2 seconds) and the LED L1 is flashing again. Pressing any of
the buttons stops the signal and the flashing, the LED goes dark and the relay closes again. If
the alarm is not stopped manually, it terminates automatically after 2 minutes.
Operation stop
In order to set an operation stop, the mode button has to be pressed repeatedly until the LED L2
is flashing. Then the desired operation stop, which is limited to a point being maximally 23.59 h
in the future, can be set using the plus and minus buttons. Once adjusted it will be stored after
approx. 5 seconds, and the LED L2 remains illuminated steadily. The display reverts to the
time-of-day. As soon as the operation stop has been reached, the relay opens and the alarm
signal sounds (4 beeps for 2 minutes) and the LED L2 is flashing. Pressing any of the buttons
stops the signal and the flashing, the LED goes dark and the relay closes again.
It is possible to combine the duration and end time in order to program a delayed mode. To do
this, both the operation period and operation stop time have to be set (above). LED L1 and L2
are illuminated and the baking process will start at a point in time “operation stop minus
operation period”. If a baking process ought to be finished at 12.00 and shall last 1.30 h, both
times have to be set in the respective modes, and the timer will switch on the oven at 10.30. The
timer is capable to avoid conflicts during the programming. (Eg with an operation period of 60
minutes resp. 1.00 hr set, and the time-of-day being 11.34 o’clock, then the operation stop can
be earliest at 12.34 o’clock.)
NOTICE // A running program can be checked and corrected at any time. In order to avoid
conflicts, it is not possible to set the time of day when an automatic program is active.
