| tisira
Regulator
Untighten the screws (10) at the right and
left sides on the rear of the tray by help
of spanner and ensure the skirt sheet into
the channel in the lower part and tighten
the screws again.
This part is supplied for use with Natural Gas
Ensure this is fitted and leak-tight at the
appliance inlet connection.
This device is fixed to prevent any failures
arising from high gas pressure and
regulate pressure at 1.0 kPa.
ULPG - NG, NG – ULPG conversions;
Figure 19
Figure 19.1 Figure 19.2
Figure 19.3
14
