Tisira TFCM629WE, Руководство пользователя, Страница: 19 / 28

pg 18 pg 19
www.tisira.com | tisira
tisira | www.tisira.com
RACK POSITIONS
It is important to place the wire grill into the oven properly.
Do not allow wire rack to touch rear wall of the oven. Rack
positions are shown in the next figure. You may place a deep
tray or a standard tray in the lower and upper wire racks.
INSTALLING AND REMOVING WIRE RACKS
To remove wire racks, press the clips shown with arrows in the figure, first remove the
lower, and than the upper side from installation location. To install wire racks; reverse the
procedure for removing wire rack.
CHANGING THE OVEN LAMP
WARNING // To avoid electric shock, ensure that the appliance circuit is open before
changing the lamp. (having circuit open means power is off) First disconnect the power
of appliance and ensure that appliance is cold. Remove the glass protection by turning as
indicated in the figure on the left side. If you have difficulty in turning, then using plastic
gloves will help you in turning.
Then remove the lamp by turning, install the new lamp with same specifications.
Reinstall glass protection, plug the power cable of appliance into electrical socket and
complete replacement. Now you can use your oven.
MAINTAINING YOUR
COOKER
220-240 V, AC
15-25 W
TYPE G9 LAMP TYPE E14 LAMP
Figure 8 Figure 9
220-240 V, AC
15 W