TIS 875770 Скачать руководство пользователя страница 7

875770 HDBaseT/HDMI/Audio Matrix 8x8   

 

TLS electronics GmbH 

[email protected]

  7 

Back Panel 

 

1. HDMI inputs 1 to 8 --- Connect HDMI sources    

2. HDBT inputs 1 to 8 --- Work with remote HDBT transmitter 

3. HDMI outputs 1 to 8--- Output for displays, AVR etc. 

4. HDBT outputs 1 to 8--- Work with remote receivers for long distance 

transmission.  

5. Ethernet--- Connect to the LAN switch for Ethernet access, embedded 1x16 

Ethernet switch for remote 8x HDBT transmitter and 8x HDBT receiver 

6. RJ45 ---TCP control 

7. Power switch--- Power on/off the unit. 

8. GND---Connect to ground. 

9. RS232 port--- 1x 3-pin phoenix terminal connector  

10. L/R In 1 to 8--- 3.5mm stereo phone-jack. 

11. IR Out 1 to 8---3.5mm mono phone-jack, connect to IR transmitter cable. 

12. Coaxial Output 1 to 8 ---RCA connector. 

13. L/R Output 1 to 8 ---3.5mm stereo phone-jack. 

14. IR In 1 to 8 ---3.5mm stereo phone-jack, work with control processor.  

15. Master RS232---1x 3-pin phoenix terminal connector 

16. Global IR Out--- 3.5mm mono phone-jack, 

17. Global IR In--- 3.5mm stereo phone-jack. 

18. AC power input---100-240V power input. 

Содержание 875770


































Отзывы: