TIPTIG Hot Wire Unit, Техническое руководство

Страница: 9 / 63

General safety instructions
The recognized technical rules and applicable standards and regulations
were followed and applied in the development and manufacture of the
TIPTIG High Speed Hot Wire Unit.
The TIPTIG High Speed Hot Wire Unit is designed and manufactured such that,
if used in accordance with it's designed purpose, any potential danger is
largely avoided.
Ing.Siegfried Plasch nonetheless feels obliged to detail the following safety
precautions which you should undertake in order to avoid any residual risk
Follow the operating Caution! When using TIPTIG Hot Wire Unit, the following fundamental
instructions! safety precautions must be taken in order to protect against electric
shock, potential injury and fire risk. Read and follow the instructions
for use,cleaning,care and maintenance given in this Technical Manual
before beginning work. Keep the Technical Manual within easy reach of
the machine operator and pass it on to new operators as and
when appropriate
The TIPTIG High Speed Hot Wire Unit is only for commercial and
industrial use. Any other use of this machine must be authorized in writing
by the manufacturer-Ing.Siegfried Plasch. Only personnel that have trained
for use and servicing of welding equipment may operate this machine
The operator for this equipment must carefully read and fully understand
all the information contained within before the unit can be put into
operation!
The information contained in this manual has been given the
manufacturer's best knowledge. However, the manufacturer can't be held
liable for the use of this information
Ing.Siegfried Plasch reserves the right to make any changes to this
machine and/or operations manual without prior notice.
Check function! Before beginning work, check that the guards and the TIPTIG Hot Wire Unit
itself are in good working order. Check the torch and machine for damage
and make sure that all parts in good working order!
Look out for damage! All parts must be correctly fitted and all conditions to met ensure trouble-free
operation of the machine. If the machine is damaged in any way, it must
no longer be used. In such cases, ensure that the machine is professionally
repaired. Identify the defect and mark the machine clearly so that it is not
used until such time as the repair has been carried out.
Maintain good order! Maintain good order in your work area! Disorder in a work area can cause
accidents. Secure your workplace when leaving it.
SAFETY INSTRUCTIONS
5
SECTION II-II