6
Safety information
- Only plug the connecting cables into the designated receptacles.
- Make sure that the connecting cables are laid in a way that accidents
are prevented.
- If necessary, install additional sockets.
Some furniture lacquers or furniture cleaning products may attack the rubber at the feet of
the telephone and thus cause patches. In such cases, please use a nonslip pad under the
device.
Batteries
CAUTION
Only insert type AAA microcell 1.5 V batteries. The batteries have to be
inserted in any case.
Batteries should be replaced as soon as the battery symbol is displayed.
For safety reasons, we recommend to exchange the batteries once per
year as discharged batteries may be subject to leakage and thus could
damage the device. Please dispose of discharged batteries environmen-
tally (no domestic rubbish).
In the case of a power failures, fully charged batteries will allow an
operation of the telephone for about 12 hours.
AC adapter, telephone line and headset
CAUTION
Only use the AC adapter from the scope of supply. The telephone is to
be connected to the 230 V mains power supply. Make sure that the AC
adapter is plugged and connected to the power supply before operation.
Only use the telephone cable from the scope of supply.
During a thunderstorm you should neither use the phone nor connect or
disconnect any cables (Danger of an electric shock when the lightning
hits the telephone network).
You may only use and connect headsets that meet the safety require-
ments of IEC 60950 item 6.2. (connection to TNV 3 circuits). For more
information, please contact your specialist dealer or headset manufac-
turer.
