![TIPTEL Ergophone C Скачать руководство пользователя страница 42](http://html1.mh-extra.com/html/tiptel/ergophone-c/ergophone-c_programming-instructions-manual_1118837042.webp)
41
Programming
#
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Enter code 660.
P
R-PIN
Enter 4-digit access code (r-PIN) (entry „0000“ not allowed)
Enter 4-digit access code (r-PIN) again for confirmation.
Press the P key. The setting is stored.
Remark:
It is not allowed to enter „0000“ as an access code for room monitoring. If this number is
entered as access code, the procedure „Activate room monitoring“ is aborted. Should you
have forgotten the access code, you can assign a new code via the above procedure.
Activate/deactivate room monitoring
The function „room monitoring“ has to be activated at the telephone in the room to be
monitored (see also page 29 of the user manual). It can only be activated, if the access
code has been programmed.
#
Press the P key and afterwards press the # key brifly.
Enter
code 60 for „room monitoring OFF“ or
code 61 for „room monitoring ON“.
Press the P key. The setting is stored.
Remarks:
- If you wish to have a „silent monitoring“ without an earlier ringing signal, you just need
to deactivate the ringing signal. For an incoming call, the display will indicate this by
„call“.
- When using the „silent monitoring“, please observe the Data Protection Law.