![TIPTEL Ergophone C Скачать руководство пользователя страница 44](http://html1.mh-extra.com/html/tiptel/ergophone-c/ergophone-c_programming-instructions-manual_1118837044.webp)
43
Programming
Set vital sign function on/off
After setting the timer, the vital sign function has to be switched on by a code additionally.
If you do not need the function anymore, switch it off.
#
Press the P key and afterwards press the # key briefly.
Enter
Code 80 for „vital sign function off“ or
Code 81 for „vital sign function on“.
Press the P key. The setting is stored.
Operation at a PABX
Program recall key
You can adjust the recall key for four flash periods of different lengths. In the
factory pre-set the first flash (also known as hook flash) is set.
The long flash is
required e. g. to activate special features offered by the telecommunications provider.
Probably, the flash setting only needs to be programmed if the telephone is operated at a
telephone system (see operating instruction of your PABX).
#
Press the P key and afterwards, press the # key (longer than 1 sec.).
Enter 4-digit-PIN.
Select code and enter:
code 700 for „Flash 1“ (0,26 sec.= Hook Flash)
code 701 for „Flash 2“ (0,09 sec.)
code 702 for „Flash 3“ (0,11 sec.)
code 703 for „Flash 4“ (0,13 sec.)
Press the P key. The setting is stored.
Program EIC/PSIC
If you operate the telephone at a PABX, the exchange identification code and the primery
station identification code serve to program the required dialling pause. As for initial opera-