TIPTEL easyDECT XL2 Скачать руководство пользователя страница 21

Страница: 21 / 85

Basic functions

2. To end the call, either press the key

or replace the handset on

the base station.

If the handset is on the base, simply pick it up to answer the phone. You
do not need to press any keys.

The callers identification can work only if your telephone network

supports the service as well as the callers one. However the caller can

still hide his/her number.

Putting a call on hold

While you are on the phone, you can put the call on hold.

1. Press the INT key longer than 2 sec. during a call to put the call on

hold. The display shows ON HOLD and your party hears a short

double beep.

2. To reactivate the held call, press the INT key again (longer than 2

sec.). ON HOLD disappears from the display and you can go on

talking.

Adjusting voice volume

Voice volume can be set in a very loud level.

During a conversation, the arrow keys adjust the level of the ear piece volume. You

can adjust the volume in three levels which are showed by the bars of the icon.

The more bars you see, the louder the volume.
Voice volume icon with tree bars = high volume level:

Using speakerphone (Handsfree mode of handset)

During a call, you may turn on the speakerphone built in the handset. In this mode

you can simply put your handset on a surface (e.g. a desk) and enjoy the comfort

of the handsfree conversation.

1. To turn the speakerphone on, press the key

during a call (line

engaged). The icon appears on the display.

Содержание easyDECT XL2






















































































Результаты поиска

Содержание easyDECT XL2

Отзывы:

Бренды по названию

Популярные бренды

TIPTEL easyDECT XL2, Руководство по эксплуатации

Результаты поиска

Содержание easyDECT XL2

Отзывы:

Бренды по названию

Популярные бренды