Configuration
40
Generally a telephone number or a target address must be sent as on e single
string. So tiptel 83 VoIP first saves all entered digits and then sends them as a sin-
gle string to the SIP proxy. In order to enable tiptel 83 VoIP to detect when a num-
ber has been dialled completely there are different procedures available:
End with # ................... Activate this option in case you wish to conclude
the telephone number to be dialled with the
key.
Note: Many programming and system functions of
your tiptel.com telephone system can then only be
programmed by sending the sequence as a single
string.
Fixed length ................. The number will be dialled once the number of dig-
its reaches or matches the number of digits pro-
grammed here.
Time out ....................... The number will be dialled when there has been no
further input for the number of seconds pro-
grammed here.
Rules
WEB
→
VoIP Phone Menu
→
Advanced Setting
→
Digital Map
→
Rules
by defining rules you can generate the dialling conclusion automatically. This
means if a number matches a rule it will be automatically dialled immediately or - if
a delay time was programmed - after the time out. Rules may also be combined
with "Dial Peer". Here. first the rule the rule detects the end of the telephone number
while "Dial Peer" then converts the telephone number.
Rules can be only one single telephone number or they can comprise wildcards or
control sequences. Following settings are available:
1234567890 ................ Once a telephone number matches the pro-
grammed sequence of digits (in this case
"1234567890") this number will be dialled.
[1,2,3] or [123] ............ Digits can (as part of a telephone number) comprise
those digits shown in parenthesis.
[1-3] ............................ Digits can (as part of a telephone number) comprise
the range of digits shown in parenthesis.
x .................................. Any digit
