First Steps
30
In some cases, especially when using tiptel 83 VoIP as a system telephone the
server port 5060 will have to be edited depending on the settings in your tiptel.com
telephone system.
WEB
→
VoIP Phone Menu
→
SIP Setting
→
Basic Set
→
Server Port
Assist
a
nt
, c
onfigu
ra
tion
w
i
zar
d
WEB
→
VoIP Phone Menu
→
Wizard
A configuration assistant will guide you through the most essential settings when
setting up your tiptel 83 VoIP.
Appli
ca
tion
notes
Application notes and notes on the configuration you will find on the homepage of
tiptel.com GmbH at http://www.tiptel.com.
Operation as a system telephone with tiptel.com 410-811
If you wish to operate tiptel 83 VoIP as a system telephone at a tiptel.com 410-811
telephone system, both devices should be part of the same network. tiptel.com 410-
811 must be programmed as SIP proxy. Please refer to the tiptel.com 410- 811
User's Manual.
Then proceed as follows:
1. In tiptel.com 410-811 programme a subscriber as SIP subscriber by proceed-
ing to the subscriber's administrator settings and selecting under "Assignment
of extensions" the port as "SIP Proxy Port". Phone number and password of the
subscriber are the access data for your tiptel 83 VoIP.
Under the subscriber's telephone number there may only be one tiptel 83 VoIP
subscribed to the telephone system.
Und system telephone please select as type "83 VoIP".
2. Now programme the network data at tiptel 83 VoIP:
Advanced
→
Network
→
Static
→
IP
An unused IP address from your network