2) Adjust the cord length retainer up to the back
of the grip by pulling the cord through it until the
retainer is snug against the back of the grip.
Keeping the cord as tight as possible, leave just
enough cord elasticity to pull the cord/retainer up
over the top of the marker to remove the barrel
blocking device for firing.
WARNING
CONGRATULATIONS on your purchase of a TPN
TM
Sierra One
TM
paintball
marker. We believe our Sierra One
TM
markers to be the most accurate and
durable paintball markers available, and are proudly manufactured by
Tippmann
®
. All Sierra One
TM
markers will provide many years of dependable
service if cared for properly.
Please take time to read this manual thoroughly and become familiar with
your Sierra One
TM
marker’s parts, operation, and safety precautions before
you attempt to load or fire this marker. If you have a missing or broken
part or need assistance, please contact Tippmann Consumer Relations at
1-800-533-4831 for fast friendly service.
TABLE OF CONTENTS
Warning/Caution ..................................................................................... 2
Warning/Caution Barrel Blocking Device Installation ............................. 2
Warning/Liability Statement .................................................................... 4
Safety is your Responsibility / Familiarize Yourself With Safety ............ 4
Safe Mode = Turning The Safety On (PUSH SAFE) ............................. 4
Fire Mode = Turning The Safety Off (PUSH FIRE) ................................ 4
Getting Started ....................................................................................... 6
1. Prepare Marker for Air Supply Cylinder Installation ....................... 6
2. Air Supply Cylinder Installation ...................................................... 7
3. Hopper Installation ......................................................................... 8
4. Velocity Adjustment ........................................................................ 8
Specifications .......................................................................................... 9
Schematics ........................................................................................... 10
Unloading Your Marker ......................................................................... 12
Air Supply Cylinder Removal / Air or CO
2
Cylinder Safety Tips ...... 12
Repairing Air Supply Leaks .................................................................. 15
Cleaning & Maintenance ...................................................................... 15
Storage ................................................................................................. 15
Marker Disassembly / Assembly .......................................................... 16
Warranty Information, Registration and Repairs .................................. 20
3
E
N
G
L
I
S
H
2
E
N
G
L
I
S
H
KEEP THE BARREL BLOCKING DEVICE INSTALLED EXCEPT WHEN
YOUR MARKER IS IN USE. ALWAYS MAKE SURE THAT THE TRIGGER
SAFETY IS IN THE SAFE MODE (SEE INSTRUCTIONS ON PAGE 4)
AND THE BARREL BLOCKING DEVICE IS PROPERLY INSTALLED ON
YOUR MARKER ACCORDING TO THE INSTRUCTIONS TO PREVENT
DAMAGE TO PROPERTY, SERIOUS INJURY OR DEATH.
WARNING
THIS IS NOT A TOY. MISUSE MAY CAUSE SERIOUS INJURY OR
DEATH. EYE, FACE AND EAR PROTECTION DESIGNED FOR
PAINTBALL MUST BE WORN BY THE USER AND ANY PERSON
WITHIN RANGE. WE RECOMMEND AT LEAST 18 YEARS OLD TO
PURCHASE. PERSONS UNDER 18 MUST HAVE ADULT SUPERVISION
WHEN USING THIS PRODUCT. READ THE OWNER’S MANUAL
BEFORE USING THIS PRODUCT.
3) After the cord length is properly adjusted, lock
the cord length by tying a knot in the cord against
the back of the retainer as shown.
2955 Adams Center Road, Fort Wayne, IN 46803 USA
P) 260-749-6022 • F) 260-749-6619 • www.tippmann.com
SIERRA ONE
TM
BARREL BLOCKING DEVICE INSTALLATION INSTRUCTIONS
5) Clean the barrel blocking device with plain, warm water and store
out of sunlight in a dry area when not in use.
1) Insert the barrel blocking device
into the barrel (or over the
barrel, depending on the style of barrel blocking device) and loop
the cord over the top of the receiver and position at the back of the
grip as shown.
4) Before and after playing, inspect the barrel blocking device and
replace if bag, plug, or cord damage, or loss of cord elasticity is found.
Cord Length
Retainer
Barrel Blocking
Device
Barrel Blocking
Device
