9
emax-usa.com
6. Press and hold both throttle trim buttons and both pitch trim buttons for 2
seconds to exit calibration mode.
Goggles
Battery and Charging
The battery cartridge comes preinstalled with a 18650 battery. If a battery reinstall is
required please use caution making sure to install with the correct polarity. The
battery can be charged in the cartridge with a micro USB cable. When the battery is
charging the indicator light is green. The indicator light will turn red when charging is
complete.
Tip:
When "low power" is displayed on the goggle display, please charge the battery.
Otherwise, goggle will shut down in two minutes
Assembly
Minimal assembly is required for proper operation of the goggles. Follow the steps
below.
1. Attach the two supplied antennas by screwing them on to the SMA
connection point.
2. Place the battery cartridge in the sleeve on the backside of the head strap.
3. Feed the power lead through the loop on the top side of the head strap and
plug in the power lead to the port on the goggles. This will power the goggles.
