Tinkerine Studio LITTO, Инструкция по сборке

Страница: 33 / 74

TINKERINE STUDIO STUDIO
support@tinkerines.com | 1-604-288-8778
33
7.
8.
Front Rod
Back Rod
Inner Bearing Cap
Inner Bearing Cap
Front Slider
GT2 Looped Belt (166mm)
Bearing
Bearing
Small Pulley
Small Pulley
Inner Bearing Cap
Bearing
Large Pulley
X-Axis Rod (270mm)
X-Axis Rod (270mm)
Back Slider
Inner Bearing Cap
Small Pulley
Bearing
With the previously assembly slider unit, you will now need
to add the rod, pulleys, inner bearing cap, and depending
on the slider you may need to include a looped belt.
Assemble the slider units as shown on the picture and
note the orientation of the pulley and panel direction of the
inner bearing cap.
Assembled each and set aside until you have all four slider
units ready for the next step.