Water Resistance
Watch
v
Your 100 Meter Water Resistant watch withstands water pressure to
200 p.s.i. (equals immersion to 328 feet or 100 meters below sea
level).
v
The watch is only water-resistant as long as the lens, pushbuttons,
and case remain intact.
v
Timex recommends rinsing your watch with fresh water after exposure
to salt water.
WARNING:
TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.
Digital Heart Rate Sensor
v
Your 30 Meter Water Resistant heart rate sensor can withstand water
pressure to 60 p.s.i. (equals immersion to 98 feet or 30 meters below
sea level).
WARNING:
THIS UNIT WILL NOT TRANSMIT YOUR HEART RATE WHEN
OPERATED IN OR UNDER WATER.
39
To test the new battery after you have inserted it:
1. Move away from any possible sources of electrical or radio
interference.
2. Wet the heart rate sensor pads and securely fasten the chest strap
below your sternum.
3. While wearing the watch, press the HEART RATE button. A hollow heart
rate icon will appear on the display.
4. If you do not see a flashing heart icon on your watch, reinstall the
sensor battery.
NOTE:
It is not necessary for a heart rate value to appear on the display
during this test.
Watch Battery Replacement
When the battery of the watch is running low, the display or INDIGLO
®
night-light will dim. This watch uses a CR2025 lithium battery.
To avoid the possibility of permanently damaging the watch, TIMEX
STRONGLY RECOMMENDS TAKING YOUR HEART RATE MONITOR WATCH
TO A LOCAL RETAILER OR JEWELER TO HAVE THE BATTERY REPLACED.
INDIGLO
®
night-light
Press the INDIGLO
®
button to activate the night light. Electroluminescent
technology illuminates the watch display at night and in low light conditions.
38
