Timespace X300 Mark 2, Инструкция по эксплуатации

Страница: 80 / 185

X300 Instruction Manual Chapter 3 - User Guide – X300 Menu System
69
3.2.9 System Security
The SYSTEM SECURITY menu sets a password to restrict user access to five key areas of the system. A
read-only access can be set that allows files to be viewed and limited features to be used. For each
area, select YES/NO.
RECORD - If set to YES, the record button on the front panel and the
Reviewer are pin code
protected.
MENU - If set to YES, access to the menu system is pin code protected.
SWITCHER - If set to YES, the button to activate auto switcher mode is pin code protected.
PLAY – If set to YES, the controls to review recorded footage are pin code protected.
READ ONLY - If set to YES, the user cannot change any setting on the X300. The menu system can be
browsed but no settings changed. If a setting change is attempted, the element will flash in RED for 2
seconds and not be changed. To exit read only mode, change read only to NO, at which point you will
be prompted for the pin code.
If access to a pin code protected function is attempted, the user is prompted with the “enter pin
code” screen. On correct pin code entry the pin code protection is temporarily disabled while that
function is being used.
NB : File Security Settings (access password and encryption protection for the recorded files) – are
set separately at SYSTEM SETTINGS > FILE SYSTEM > FILE SECURITY SETTINGS .