Timespace X300 Mark 2, Инструкция по эксплуатации

Страница: 23 / 185

X300 Instruction Manual Chapter 3 - User Guide – X300 Menu System
12
3.1.2 Timer Recording
X300 Mark 2 Timer Recording Menu X300-16M Timer Recording Menu
Daily on/off timers can be set to provide timed recording. This menu sets the recording configuration
and times. During TIMER RECORDING the settings in this menu apply.
Images per second (
RATE ) and quality (QUAL) can be set individually for each camera in the same
way as for NORMAL RECORDING .
If AUDIO is required during TIMER RECORDING, this must be set up separately in the
AUDIO
RECORDING menu.
WHEN TIMER STOPS: At the end of a period of TIMER RECORDING the X300 can either STOP
RECORDING or record in NORMAL RECORDING mode. The latter can be used if two recording styles
are required based on time.
REC SPECIFIED CAMS - This sets the X300 to record the cameras in the manner specified. The
alternative setting is
REC CONNECTED CAMS which would only record the cameras that the X300 has
detected as being connected. This allows the X300 to be configured with recording RATE and QUAL
prior to cameras being installed, and then t o be deployed with cameras without reconfiguring the
menu, just plug & play.
Enter the daily start and end times in the
RECORDING SCHEDULE .
TOTAL IPS – provides details of current IPS as configured within TIMER RECORDING, as well as the
total IPS available.
NB: ensure cameras have been configured for TIMER RECORDING or no footage will be recorded
during times set in the RECORDING SCHEDULE .