Timespace X300 Mark 2, Инструкция по эксплуатации

Страница: 185 / 185

X300 Instruction Manual Chapter 9 - Appendices
174
If no service or fail logs are available (e.g. if a service log reset has been performed), then no
log information will be available.
<11.log_ts>
Description: The timestamp of the last service log.
Format is “hhmmss ddmmyy” or “hhmmss mmddyy” depending on menu setting
(OTHER>TIME AND DATE mode option).
Note that there are no separator characters in the time and date strings due to message size
limitations.
Contents:
Log timestamp – timestamp
“–” – May be blank if no log.
<12.log_mode>
Description: Service log mode, e.g. Service, Failure.
Contents:
Mode text – Mode text.
“–” – No mode available or no log available.
<13.log_code>
Description: Service log code relating to mode.
Contents:
Code text – Mode text.
“–” – No code available or no log available
<14.log_desc>
Description: Reason for service log.
Note: Due to message length constraints, this information may be
partial or missing.
Desc text – Log description text.
Final page of Appendices