TimeLink TLR401, Руководство пользователя

Страница: 20 / 29

TLR401 Administration
20
5.8 Define Facility Code
These settings only apply to the trigger signal of the reader's biometric sensor sent to the
access controller. The Facility Code of iCLASS cards is sent to the access controller
untouched and independent of these settings.
In a Wiegand configuration you can set the Facility Code of the biometric sensor according
to your requirements. The Default Facility Code for 37-bit is '830'.
Admin Mode # 99 # Green 1+2
Default Admin Code 1234
or enter your Admin Code xxxx # Green 1+2+3
Function Menu 14 # Green 1+2 flashing Beep
Define Facility Code 20 # Green 3+4 flashing Beep
1 – 5 digits # Green 1+2 flashing Beep
37-bit (Default = 830) 0 … 65535 #
26-bit (Default = 1) 0 … 255 #
Finalize by 3 x # ###
or wait for Timeout
Caution
5.9 Choose 37-bit or 26-bit Format
These settings only apply to the trigger signal of the reader's biometric sensor sent to the
access controller. The Facility Code of iCLASS cards is sent to the access controller
untouched and independent of these settings.
In a Wiegand configuration the format of the biometric sensor's trigger signal to the access
controller can be defined (e.g. Set the biometric sensor's format to the 26-bit format if HID
cards with 26-bit standard format are used).
Admin Mode # 99 # Green 1+2
Default Admin Code 1234
or enter your Admin Code xxxx # Green 1+2+3
Function Menu 14 # Green 1+2 flashing Beep
Choose Format 19 # Green 3+4 flashing Beep
37-bit with Facility Code 0 # Green 1+2 flashing Beep
(Default)
26-bit with Facility Code 1 # Green 1+2 flashing Beep
Finalize by 3 x # ###
or wait for Timeout
If both fingers and iCLASS cards are employed in a Wiegand
configuration your range of fingerprint User IDs must not overlap
with your range of card numbers!