5
Cleaning
●
Care should be taken when cleaning this product.
●
Inside the lid should only be cleaned with a clean dry cloth.
●
The outside can be cleaned with a mild detergent.
●
Solvent based cleaners should not be used.
●
Advice should be sought before installing this product in an
environment where it is likely to be subjected to chemicals, oils or
solvents.
Service items
The gaskets, neons, lid seals and cable seals
are sold separately.
Replacement of the gasket on all products
except for the switches is straightforward as it
is a direct replacement.
Switch products have an integral gasket and
membrane. Should only the gasket need to be
replaced, cut into the four positions shown in figure 6.
If the membrane needs to be replaced then the switch assembly
needs to be removed from it’s mounting plate. Care should be taken
not to strip the screws and that a watertight joint is maintained
between switch assembly, membrane and mounting plate (figure 7).
Fig 6
Fig 7
REMOVE THE
TWO SCREWS
SHOWN AND
THEN THE
SWITCH
ASSEMBLY
REMOVE SCREW
AND WASHER
