2
e
Fig 1
Installation instructions
●
These products should be installed by a competent person (eg.
qualified electrician) in accordance with these instructions and in
compliance with the appropriate clauses of the current edition of
the IEE wiring regulations. Sockets should be connected via a
suitable RCD device.
●
Disconnect the mains electricity supply.
●
The Weathersafe range is designed to be mounted on a vertical
flat surface, with socket outlets not more than 1.5 metres above
the ground (this does not apply to switches).
●
To remove rockers from WPL range prise off using a flat blade
screwdriver (figure 1). Use a piece of cloth or similar to prevent
marking the unit. This allows access to the four fixing screws.
