11
10.4 The P1 ON (Programme 1 ON) hour will flash, use the Up/Down arrow
button to choose the hour and press the Select button once to confirm.
10.3 The heating (HTG) icon will start to flash with the hot water (HW)
remaining solid. Use the Up/Down arrow buttons to change the channel
you wish to program, the chosen icon is the flashing one, and press the
Select button once to confirm.
10.5 The minutes will flash, use the Up/Down arrow button to choose the
minutes and press the Select button once to confirm.
10.6 The P1 OFF (Programme 1 OFF) hour will flash, use the Up/Down arrow
button to choose the hour and press the Select button once to confirm.
10.7 The minutes will flash, use the Up/Down arrow button to choose the
minutes and press the Select button once to confirm.
10.8 The P2 ON (Programme 2 ON) hour will flash. Follow steps ‘10.3’
to ‘10.6’ for P2 (Programme 2 ON and OFF) and also P3
(Programme 3 ON and OFF).
10.9 Press the Set button once to change the day of the week (e.g. Tue).
Use the Up/Down Arrows to choose the day of the week, and press
the Select button once to confirm.
10.10 Follow steps ‘10.3’ to ‘10.9’ until you have Programmed
each day of the week that you require.
10.11 Press the Set button twice
to exit the Programme entry.
Use the Up/Down
arrow buttons to
change the hour
The hour will flash
Heating (HTG) icon indicating the heating
channel is being programmed
Use the Select
button to
confirm
Use the Up/Down arrow buttons if you wish
to change this to hot water, and the hot
water (HW) icon will flash
The heating (HTG) icon will
flash meaning it is selected
and ready to be programmed
Use the Select
button to
confirm
