10
10. Programme Entry
Note:
• If you have selected weekday/weekend (5-2) Programming via the DIP
switches (see section 7. DIP Switch Settings) you will be able
to group Monday – Friday for the same ON and OFF times,
and then group Saturday – Sunday for the same ON and OFF times.
• If you have selected individual (7) day Programming via the DIP switches,
then you will need to set ON and OFF times for each day of the week,
Monday through to Sunday, for each day you require.
• The Copy function can be used to duplicate ON and OFF times for different
days of the week, as detailed further in the instructions
(read the instructions in full before you begin).
The following steps use the individual (7) day Programming as an example.
The steps for weekday/weekend (5-2) Programming are the same,
except you will be able to select either M – F (Monday to Friday grouped)
or S – S (Saturday and Sunday grouped), instead of individual days.
10.2 The Day of the week will flash (e.g. Mon), use the Up/Down arrow
buttons if you need to choose a different day of the week, and then
press the Select button once to confirm.
10.1 Press and hold the Set button for 3 seconds to enter the Programming
mode, the display light will illuminate.
Use the Up/Down arrow
buttons to change the
day of the week
Mon will flash
when selected
Use the Select
button to
confirm
