7
8. Initial Set-up and Operation
• Switch the power to the detector on, the sensor LED indicator and load
will turn ON for a warm-up period of approximately 60 seconds.
• Once the warm-up period is complete, walk in front of the
detector until the load turns ON. This checks the operation of the
detector and field of view.
• When in Test Mode (when using the Timeguard IRRDALI remote control), the
sensor LED indicator and load will turn ON for 3 seconds when each movement
is detected. Without the IRRDALI remote control, the sensor LED indicator will
turn on the load for the duration as set on the TIME setting
(minimum is 10 seconds).
• Walk around the sensor to establish the detection area.
• Turn the TIME and LUX control settings to the desired positions.
• The detector is now in Auto Mode and will operate according to the pre-set
TIME and LUX light level adjustments. Once activated, the sensor
LED indicator and load will remain ON until it times out.
