6
7. Adjustments
• The adjustments can be found beneath the top cover of the sensor. Check that
the sensor is set to factory defaults, with the adjustments set as follows;
TIME ON setting:
10 seconds
CONSTANT LUX setting:
1000 Lux
STDBY TIME
:
OFF
DALI Group
:
F
•
LUX:
Used to set the threshold light level to activate the sensor when
it changes from day to night.
•
CONSTANT LUX:
At the selected threshold light level the sensor will be
activated. The sensor will automatically regulate the load to keep the light level
at the selected threshold until it moves from day and over the threshold.
•
TIME:
Used to select the desired time ON delay for when the sensor
is activated.
•
STDBY (Standby) TIME:
Used to select the time delay for standby
(fixed at 20% of the brightness of the load).
•
DALI Group:
Used to select the channel 0 to E for grouping 0-14 of the
connected load, or Channel F to broadcast to all of the connected loads.
•
Push Button Function (S Terminal):
An external push button can be
installed for manual light control (see section 6. Connection Diagram).
Press the button once to turn the load ON, the time ON delay will be adjusting
to the TIME adjustment. Press the button once again to turn the load OFF, the
time OFF delay will also activate according to the TIME adjustment. Hold the
button down to dim (up or down) the load, and release the button and the
current brightness value will be retained. Hold the button down a second time
to dim the load the reverse way.
