9
12
• Make sure the font cover clicks into
place. Lock the captive latch located
on the bottom of the sensor using a
2.5mm Allen key, by pushing up fully
and then turning clockwise (quarter
turn), so the dot indicator aligns with
the ‘Locked’ symbol (See image 12).
8. Manual Override
• The light can be switched ON for longer time periods by use of the
Manual Override Mode. This can be activated at night time (only) by using
the internal wall switch or circuit breaker. Switch the internal wall switch twice
(OFF/ON, OFF/ON) within 2 seconds.
• The unit will now illuminate continuously for 6 hours, or until it is switched
back into Auto Mode.
• To return to Auto Mode, switch the internal wall switch OFF and then
back ON again within 2 seconds.
• The unit will return to its Auto Mode and will operate normally as set up.
