2
4. Installation
4.1 Ensure the mains supply is switched off and the circuit supply fuses
are removed or the circuit breaker turned OFF.
4.2 Remove the wall plate by releasing the 2 lugs, left & right, located
on the rear bottom section of the luminaire and gently ease the wall
plate down/outwards from the top.
4.3 Mark the position of the mounting holes on the wall using the wall plate as
a template, and drill the holes ensuring not to infringe with any gas/water
pipes or electrical cables that may be hidden below the surface. Insert the
wall plugs.
4.4 Secure the supply cable into the wall plate through the hole(s) provided
ensuring that a cable gland, grommet or sealing compound is used to
maintain the IP rating of the luminaire.
4.5 Fix the wall plate using the correct screws for the wall plugs installed.
Installation
TIMEGUARD LED BULKHEAD UC MANUAL DRAWING
1 /
/
1
,62/$7,21
6:,7&+
MAINS
SUPPLY
Connection Diagram
Installation
TIMEGUARD LED BULKHEAD UC MANUAL DRAWING
1 /
/
1
,62/$7,21
6:,7&+
MAINS
SUPPLY
Connection Diagram
Содержание LED88N
Страница 7: ...6...
