timecode systems UltraSync BLUE, Руководство пользователя

Страница: 51 / 118

5. If you want your UltraSync ONE to output genlock, word clock, or timecode
via the SYNC port, set the appropriate SYNC O/P Mode (see Set the SYNC
Output on page 76 ). If you are not using the SYNC output, ignore this step.
6. Use the Set Timecode option to set the clock for your master UltraSync ONE
Set the Timecode for the Master on page 72 .
7. Use the Set FPS Rate option to set the frames-per-second rate to match the
FPS of the connected device (see Set the Frame Rate Per Second on page 73 ).
8. Use the Local or EXT U/B option to set your UltraSync ONE to use either local
user bits or external user bits (see Set the User Bits on page 74 ). If you choose
local user bits, you will also need to set the user bits.
9. Set the output level for the port that is used for the wired connection to your
external device. You need to set the level so that the voltage of the signal is
appropriate for your device. For more details, see:
l
Set the SYNC Output (see page 76)
l
Set the LTC Level (see page 78) .
Your UltraSync ONE will send timecode, FPS, and user bits data (and possibly word
clock or genlock, depending on your selections) to the wired devices. The wired
devices receive the data and synchronise with your master UltraSync ONE.
See also:
l
Master and Slaves (see page 24)
l
Master TX (see page 33)
UltraSync ONE User Guide 51