timecode systems UltraSync BLUE Скачать руководство пользователя страница 110

Страница: 110 / 118

Battery Safety and Disposal

UltraSync ONE contains a battery. The battery may contain toxic heavy metals and

is subject to hazardous waste regulations.

To make sure you use and dispose of your UltraSync ONE safely and responsibly,

please follow these safety and disposal instructions.

Battery Safety

DANGER - Risk of burns, injury, battery damage

Do not attempt to remove or disassemble the battery.

Do not expose the battery to heat or liquid.

Do not use or charge the battery in temperatures above 60°C.

Do not bend, pierce, or crush the battery.

Do not allow the battery to come into contact with metal objects.

Do not weld the battery.

Only use the product and charge the battery as described in the user guide.

Incorrect use could result in fire, explosion, smoke, heat, and battery leakage.

Do not use a damaged battery.

Do not put product or battery into a microwave over, dryer, or high-pressure

container.

If the battery does not charge in the expected time, stop charging and contact

Timecode Systems for advice.

Stop using the product if there is abnormal heat, odour, discoloration, or

deformation when in use, charging or in storage.

If the battery leaks on to your skin or clothes, wash with fresh water

immediately.

If liquid from the battery gets into your eyes, do not rub them. Wash your eyes

with fresh water and seek medical attention immediately.

Disposal and Recycling

Please

do not

dispose of your UltraSync ONE, its battery, or accessories such as

chargers, with your household waste. Make sure you follow the local legal

110

UltraSync ONE User Guide

Содержание UltraSync BLUE























































































































Результаты поиска

Содержание UltraSync BLUE

Отзывы:

Похожие инструкции для UltraSync BLUE

Бренды по названию

Популярные бренды

timecode systems UltraSync BLUE, Руководство пользователя

Результаты поиска

Содержание UltraSync BLUE

Отзывы:

Похожие инструкции для UltraSync BLUE

Бренды по названию

Популярные бренды