3.7 NTP/PTP Settings Page
The setup page can be used to turn and off the two major time server features. The current status of
each is shown in its section.
3.7.1 NTP Server
The NTP daemon can be started and stopped from this page. By default, NTP support is enabled once
3D lock is achieved. Click the desired option and then click the Submit button.
3.7.2 Allow 2D Fix for NTP
This checkbox will allow the TM2000A to start serving time once a 2D lock is achieved by the GPS
receiver. It is generally better to get a 3D lock as timing accuracy is much better. The GPS module
maker doesn't guarantee accuracy until a 3D lock is achieved, but this option exists if needed. If the
TM2000A is capable of getting a 3D lock, then this option should generally be un-checked.
Installation and Operations Manual | Page 10
Web / timemachinescorp.com Email / [email protected] Phone / (402) 486-0511
