manualshive.com logo in svg

Timberwolf TW 280TDHB, Инструкция по эксплуатации

Поделиться
Скачать
Timberwolf TW 280TDHB Скачать руководство пользователя страница 52

TW 280TDHB/(a)

14 / 65

OPERATING INSTRUCTIONS

C190-0142

01.03.2019

Rev: 2.0

 

THE FOLLOWING PAGES DETAIL ONLY BASIC 

MAINTENANCE GUIDELINES SPECIFIC TO YOUR CHIPPER. 

 

THIS IS NOT A WORKSHOP MANUAL.

 

 

The following guidelines are not exhaustive and do not extend to generally accepted standards of 
engineering/mechanical maintenance that should be applied to any piece of mechanical equipment and the chassis 
to which it is mounted. 

Authorised Timberwolf service agents are fully trained in all aspects of total service and maintenance of Timberwolf 
wood chippers. You are strongly advised to take your chipper to an authorised agent for all but the most routine 
maintenance and checks. 

Timberwolf accepts no responsibility for the failure of the owner/user of Timberwolf chippers to recognise generally 
accepted standards of engineering/mechanical maintenance and apply them throughout the machine. 

The failure to apply generally accepted standards of maintenance, or the performance of inappropriate maintenance  
or modifications, may invalidate warranty and/or regulatory compliance, in whole or in part. 

Please refer to your authorised Timberwolf service agent for service and maintenance.

Problem

Cause

Solution

Caution - Always ensure appropriate PPE is worn.

Wood chip 
ejection 
stopped / 
limited

Obstructed 
discharge

Clear debris from discharge chute.

Ensure machine is off and keys 
removed.

Loose drive belts

Refer to manual & tension belts guidelines.

Ensure machine is off and keys 
removed.

Broken rotor 
paddles

Inspect paddles, replace broken / missing 
paddle.

Ensure machine is off and keys 
removed. Call engineer for repair.

Rotor does 
not turn

Obstructed 
discharge

Clear debris from discharge chute.

Ensure machine is off and keys 
removed.

Rotor jammed

Inspect & clear infeed funnel, roller box and 
rotor housing.

Ensure machine is off and keys 
removed.

Drive belt issue

Inspect drive belts, replace if required. 
Refer to manual & tension belts guidelines.

Ensure machine is off and keys 
removed.

Slow or not 
feeding

Low engine speed

Check & inspect throttle and cable. Check 
throttle is set to specified speed.

Ensure machine is off and keys 
removed.

Infeed rollers 
jammed

Inspect & clear infeed funnel, roller box and 
rotor housing.

Ensure machine is off and keys 
removed.

Hydraulic oil

Check hydraulic oil level, top up if 
necessary.

Ensure machine is off, cool & pressure 
isn’t present within the system.

Blades dull

Rotate, sharpen or replace blades.

Ensure machine is off and keys 
removed.

Anvils dull

Check anvil has sharp edge, rotate, sharpen 
or replace if necessary.

Ensure machine is off and keys 
removed.

Obstructed 
discharge

Clear debris from discharge chute.

Ensure machine is off and keys 
removed.

TROUBLESHOOTING 

This table is a troubleshooting guide to common problems. 

If your problem is not listed below, or is unresolved after following the guide, please contact your Timberwolf service agent, 
whose Timberwolf trained engineers can perform further fault finding.  Before you call, please have this operating manual 
and the machine serial number ready. 

Содержание TW 280TDHB









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды