Timberwolf TW 280TDHB, Инструкция по эксплуатации

Страница: 45 / 104

TW 280TDHB/(a)
7 / 65
SAFE WORKING
C190-0142 01.03.2019 Rev: 2.0
GENERAL SAFETY MATTERS
Do not operate chipper unless available light is sufficient •
to see clearly.
Do not use or attempt to start the chipper without the •
feed funnel, guards and discharge unit securely in place.
Do not stand directly in front of the feed funnel when •
using the chipper. Stand to one side.
Do not smoke when refuelling. •
Do not let anyone who has not received •
instruction operate the machine.
Do not climb on the machine at any time. •
Do not handle material that is partially •
engaged in the machine.
Do not touch any exposed wiring while the machine is •
running.
Do not use the chipper inside buildings. •
Noise levels above 80dB (
A
) will be
experienced at the working position.
Prolonged exposure to loud noise may cause
permanent hearing loss. All persons within a 4
metre radius must also wear good quality ear
protection (EN 352) at all times to prevent
possible damage to hearing.
Guaranteed Sound
Power: 118dB (
A
)
As required by Annex III of Directive
2000/14/EC “Noise Emission in the
environment by equipment for use outdoors”.
Tested according to BS EN ISO 3744:2010.
NOISE TEST
Machine: TW 280TDHB
Notes: Tested chipping 200mm x 200mm corsican pine 1.5m in length
DO NOT ALLOW
THE FOLLOWING
TO ENTER THE
MACHINE, AS
DAMAGE IS
LIKELY
BRICKS STRING ROOTS BEDDING
PLANTS
STONES METAL GLASS RUBBER
CLOTH PLASTIC
99.10 dB
92.20 dB
R= 4 metres
100.73 dB
R= 10 metres
87
.9d
B(A
) C
alc
u
la
te
d
87.
9d
B(
A)
C
al
cu
la
te
d
8
7
.9
d
B
(A
)
C
a
lc
u
la
te
d 95.23 dB
91.90 dB
92.60 dB
91.07 dB
95.27 dB
93.33 dB