Timberk TEC.PS1 LE 2000 IN, Инструкция по эксплуатации

Страница: 3 / 23

www.timberk.com • electric convector heater www.timberk.com • electric convector heater
5
4
10. A built-in fall sensor will switch off the convector if it is turned away
from a vertical position, for example, if it is accidentally tipped over
when operated on legs.
11. Additionally, it is possible to purchase and install a set of a humidifier
and a heated towel rail.
12. Wide variety of control panels in the series: control panel with a
mechanical thermostat (TEC.PS1 M…IN), control panel with a high-
precision electronic thermostat and LED display (TEC.PS1 LE…IN),
control panel with a high-precision electronic thermostat, LED display
and remote controller (TEC.PS1 RCE…IN), as well as control panel
with a high-precision electronic thermostat, LCD display and an
opportunity for a weekly programming of convector operation modes
(TEC.PS1 PGE…IN).
Dimensions of convectors depending on power (Fig. 1)
Timber series convectors are distinguished on maximum consumed power
of the heating element and differ from each other by the unit’s length at
equal height and depth. (Standard overall height of all units is equal to 400
mm). This pattern in forming overall dimensions allows the consumer to
use Timberk convectors of different power in one room next to each other
without breaking regular symmetries, and perfectly integrating several
units into your interior at the same time.
Overall dimensions of the convector
Table 2
Dimensional specifications
For a detailed description of technical parameters and characteristics go to www.timberk.com
or contact TIMBERK official dealers.
Technical characteristics
Table 1
Fig. 1
Identification
number
Rated
voltage,
V/Hz
Rated
current,
A
Rated
power,
W
Power
modes, W
Class of
protection
Class of
electric
protection
Dimensions,
mm
Net
weight,
kg
TEC.PS1 M
500 IN
220-
240/50
2,3 500 250/500 IP24 class I 476х400х57 4,0
TEC.PS1 M
1000 IN
220-
240/50
4,5 1000 500/1000 IP24 class I 656х400х57 5,1
TEC.PS1 M
1500 IN
220-
240/50
6,8 1500 750/1500 IP24 class I 930х400х57 6,7
Identification
number
Rated
voltage,
V/Hz
Rated
current,
A
Rated
power,
W
Power
modes, W
Class of
protection
Class of
electric
protection
Dimensions,
mm
Net
weight,
kg
TEC.PS1 M
2000 IN
~
220-
240/50
9,1 2000 1000/2000 IP24 class I 1267х400х57 8,6
TEC.PS1 M
2500 IN
~ 220-
240/50
11,4 2500 1250/2500 IP24 class I 1267х400х57 8,7
TEC.PS1 LE
500 IN
~ 220-
240/50
2,3 500 250/500 IP24 class I 476х400х57 4,0
TEC.PS1 LE
1000 IN
~ 220-
240/50
4,5 1000 500/1000 IP24 class I 656х400х57 5,1
TEC.PS1 LE
1500 IN
~ 220-
240/50
6,8 1500 750/1500 IP24 class I 930х400х57 6,7
TEC.PS1 LE
2000 IN
~ 220-
240/50
9,1 2000 1000/2000 IP24 class I 1267х400х57 8,6
TEC.PS1 LE
2500 IN
~
220-
240/50
11,4 2500 1250/2500 IP24 class I 1267х400х57 8,7
TEC.PS1 PGE
500 IN
~
220-
240/50
2,3 500 250/500 IP24 class I 476х400х57 4,0
TEC.PS1 PGE
1000 IN
~
220-
240/50
4,5 1000 500/1000 IP24 class I 656х400х57 5,1
TEC.PS1 PGE
1500 IN
~ 220-
240/50
6,8 1500 750/1500 IP24 class I 930х400х57 6,7
TEC.PS1 PGE
2000 IN
~ 220-
240/50
9,1 2000 1000/2000 IP24 class I 1267х400х57 8,6
TEC.PS1 PGE
2500 IN
~ 220-
240/50
11,4 2500 1250/2500 IP24 class I 1267х400х57 8,7
TEC.PS1 RCE
500 IN
~ 220-
240/50
2,3 500 250/500 IP24 class I 476х400х57 4,0
TEC.PS1 RCE
1000 IN
~ 220-
240/50
4,5 1000 500/1000 IP24 class I 656х400х57 5,1
TEC.PS1 RCE
1500 IN
~
220-
240/50
6,8 1500 750/1500 IP24 class I 930х400х57 6,7
TEC.PS1 RCE
2000 IN
~
220-
240/50
9,1 2000 1000/2000 IP24 class I 1267х400х57 8,6
TEC.PS1 RCE
2500 IN
~
220-
240/50
11,4
2500 1250/2500 IP24 class I 1267х400х57 8,7
Series Power modes TL (mm) H (mm) A (mm) L (mm) B (mm) H23 (mm)
TEC. PS1... 2500/1250 1267 400 458 350 458 188
TEC. PS1... 2000/1000 1267 400 458 350 458 188
TEC. PS1... 1500/750 930 400 290 350 290 188
TEC. PS1... 1000/500 656 400 218 250 188 188
TEC. PS1... 500/250 476 400 194 155 128 188
IMPORTANT!
The manufacturer reserves the right to change the set-list
of the device (including liquid and powder components)
for different supplies without prior notice. The changes
either in no way influence the basic technical parameters
of the device or may improve them, and also not violate
the legislation or quality standards of the countries of
manufacture, transit and selling.
The changes in the set-list may result in changing of the
weight and dimensions of the device, but not more than
by +\- 5-20% (depending on the product category)
500 W
476 mm
1000 W
656 mm
1500 W
930 mm
2000/2500 W
1267 mm
400 mm
Fig. 2
1. Control panel
2. Outlet grill louver
3. Unit’s case (front part)
4. Support legs
5. Cold air inlet
6. Humidifier*
7. Heated towel rail*
* optional devices, not included in the standard scope of delivery (to be purchased separately)
1. Convector, with a bracket and a carrying handle - 1 pc.
2. Mounting set - 1 pc.
3. Support leg - 2 pcs.
4. Operation manual - 1 pc.
5. Guarantee card - 1 pc.
6. Packing - 1 pc.
4. DESCRIPTION OF THE CONVECTOR (FIG. 2)
5. SCOPE OF DELIVERY
6
2
3
4
5
Fig. 3
7 1