Timberk T-HU3.5-A15E-W, Инструкция по эксплуатации

Страница: 20 / 44

IM2021
20
mode; if the current level of relative humidity in the room is ≥61%, the humidifier will
operate in low evaporation rate mode.
To disable this mode, you need to press the button again, the AUTO symbol will go out
on the display, and the device will return to the previous operating mode.
Night Mode
To turn off the display backlight, press the button , to turn on the backlight, press
the button again.
Function is "PLASMA".
Press the button to activate the "PLASMA" function. In this mode, the ionization
function is activated to saturate the air with aeroions, which help to strengthen the
nervous and circulatory systems, improve lung activity and protect against respiratory
diseases.
Switching off
Press the button to turn off the device. Unplug the power cord.
6. CLEANING AND MAINTENANCE

Before cleaning the appliance, make sure it is unplugged. Otherwise, it may result
in electric shock.

Before cleaning, in order not to burn your hands, wait until the water in the base of
the appliance has completely cooled.

Use a damp and soft cloth to wipe the outside of the appliance.

To avoid electric shock, do not scratch or damage the components of the device
when cleaning.

Do not use solvent, gasoline, dimethylbenzene, hard brush, talcum powder and
other substances when cleaning the device.

Wipe off any remaining water inside the base of the unit under the tank with a
damp and soft cloth.

To remove water on small parts, you can use a brush and then wipe them again
with a soft cloth.

Clean the device once or twice a week.

If dirt is formed on the membrane, clean it with a brush.

Rinse the water tank cover and nozzle carefully and effortlessly with fresh water,
otherwise this will cause water to leak through the cover.

After removing any remaining water from the surface of nozzle, wipe it with a soft
cloth.

Clean the outside of the appliance with a damp and soft cloth.