Timberk T-HU3.5-A15E-W, Инструкция по эксплуатации

Страница: 19 / 44

IM2021
19
Switching on
Install the appliance vertically on a flat and dry surface, fill the tank with water then
connect the device to the power line. Press the button. The device will start to
operate in low steam intensity mode. At the very beginning of operation, the atomizing
level may appear unstable, which is caused by the temperature difference and water
quality. It will take a short period time for this process to stabilize.
Adjusting steam outlet intensity
Press the button to adjust steam outlet intensity. After turning on the device, it will
operate in low steam intensity mode. Press the button one time to select medium
steam intensity. Press the button again to select high steam outlet intensity.
The more steam comes out, the stronger and faster air humidification will be.
Comfortable conditions are reached at 40 to 60% relative air humidity. You can
yourself determine the comfortable humidity level or use hygrostat function by pressing
the button.
ATTENTION!
If a large amount of condensate is generated on the upper part of the appliance when it
is operating, then you need to decrease the steam outlet intensity.
ATTENTION!
In case of water shortage the indicator will light in red, on the right side of the
display.
TIMER function
Press the button to select shutdown time. Time can be selected in the following
order: 1-12H, step 1H
.
Constant humidity settings (hygrostat function)
During operation of the device press the button to select automatic required
relative humidity level.
The AUTO symbol appears on the display. After switching on this mode, the device
independently adjusts the steam flow rate, in accordance with the actual level of
relative humidity in the room.
If the current level of relative humidity in the room is ≤ 49% ≤, the humidifier will
operate in high evaporation rate mode; if the current level of relative humidity in the
room is between 50% and 60%, the humidifier will operate in medium evaporation rate