Timberk AC TIM 07H S8ML страница 6 Скачать руководство пользователя

Страница: 6 / 16

ENGLISH

ww.timberk.com

Electric air conditioner (split system, in set of two units)

AUTO mode (SMART)

The auto mode is turned on and off with the use of the button MODE on the

remote control board.

1. While working in the AUTO mode, a microprocessor will automatically select

COOL, FAN, HEAT or DRY modes based on the difference between actual and

preset air temperature indoors.

2. If the AUTO mode does not provide comfort conditions, select the mode

manually. In automatic mode, depending on air temperature in the room, the

conditioner will select needed temperature parameters of its operation in the

following order:

7. OPERATING MODES

"SUPER" mode (TURBO)

When pressing the "TURBO" button on the remote control board, the

conditioner will start working in turbo mode for maximum cooling (in cool

mode) or for maximum heating (in heat mode).

NOTE

If there is a difference between set and actual air temperature in

DRY mode, the conditioner will automatically turn on in COOL or

FAN modes.

TIMER mode

Procedure of timing:

If the conditioner is off, then press the TIMER button to activate the automatic

turning on. Pressing this button once again, set the time for turning the

conditioner on in the set time interval. To cancel the timer mode, press the

TIMER button once again.

If the conditioner is working, then press the TIMER button to activate the

automatic turning off. Pressing this button once again, set the time for turning

the conditioner off in the set time interval. To cancel the timer mode, press the

TIMER button once again.

"SLEEP" mode

Button «SLEEP» (Night Care). Using this button, you may turn the sleep mode on

and off. In this mode, if working for cooling, the conditioner will increase

temperature by 1 ° from the specified one within two hours. If working for

heating, the conditioner will decrease temperature by 1 ° from the specified

one within two hours. After 10 hours of operation the conditioner will turn off

automatically.

Regulation of treated air flow direction

Regulating the position of deflectors (blinds), set the direction of treated air
flow ensuring uniform distribution of temperature and the most comfort
conditions in the room. To change the position of deflectors, use the "SWING"
button.

Before cleaning unplug the conditioner.
Cleaning of the indoor unit and remote control board:
Indoor unit and remote control board should be cleaned with a dry soft
cloth.
If the indoor unit is too unclean, moisten the cloth with cold water.
It is prohibited to clean the remote control board with moist cloth.
In order to avoid the damage of paint or details of the conditioner, do not
clean it with brushes and do not leave them on the surface of indoor unit.
In order to avoid the damage of surface or deformation of the conditioner
details, do not clean it with petrol, solvents, cleaning powders or other
chemically active substances.
Before a sustained interruption in the conditioner work:
Turn the conditioner on for several hours in the FAN mode. It will allow you
to dry its inner cavities
Unplug the conditioner. Remove the batteries from the remote control
board.

8. MAINTENANCE

Smart mode allows changing threshold of switching from mode to mode.

During operation in Smart mode you see "-" on the display. Press

keys

Temp

+/-.

"-"

will

change

+(-) 2.

The range shift of this threshold is within -2...+2 of

default temperatures.