background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

User manual Maxi uni 

-1- 

Safety Advice 

 

  Before using the torch, ensure that you read and understand the safety advice leaflet so that the torch is  

always operated correctly. 

  Never point the light beam at your or other persons eyes. Doing so could damage the retina. 

  Keep the torch away from children. 

  Never attempt to take the torch apart unless it is specifically directed in the operating instructions. Doing so can result in severe 

injuries and electric shocks. Servicing of internal components, servicing or repairs have to be carried out by qualified persons, 
authorized by  the manufacturer. 

  If smoke or steam appears, switch off the mains or battery supply immediately. Disconnect  the torch head from the battery and 

remove the charger from the socket. 

  Do not touch the charger’s power cable with wet hands as there is danger of an electric shock or short circuit. To disconnect, 

depress the catch on the connector whilst withdrawing it from the charging adapter plug. Do not disconnect it by pulling on the 
cable. 

  To prevent overheating, damage, fires, electric shocks or other dangers only use the charger  and attachments supplied. 

  Keep the torch and battery pack away from open fires or sources of heat as it could lead to overheating, fires, electric shocks 

and explosions and cause severe injury. 

  Never attempt to change or take apart  the battery pack. To do so could lead to injury by explosion. 

  Do not drop the batteries or battery packs and protect them from impact. Damage could result in leakage of the battery 

chemicals and result in injuries.  

  Clean with water all areas of the body (especially mouth and eyes) or clothing that come in contact with battery chemicals. 

  Never short across the battery contacts with metal objects (e.g. key rings, screwdrivers etc) as this could result in overheating 

and to burns and other injuries. 

  After charging disconnect the charger from the battery pack and the mains socket to avoid fires or other damage

  The charger supplied with the torch has been developed for use exclusively with the torch and battery pack. Do not use it with 

other products or batteries as this could result in fires or damage. 

  Use and store the torch, battery pack and charger away from exposure from heavy solar radiation or high temperature (e.g. the 

dashboard or the boot of a car etc.). Heavy solar radiation and heat can lead to leakage, overheating or explosion of the 
batteries which can result in fire other damage.  

  While charging the battery pack keep it in a well ventilated area.  

  Charge the battery pack at room temperature. 

  If the batteries become too warm, cease charging immediately. Normal temperature is slightly higher than “hand-hot“ ( +/- 50 

degree ) 

  Let the batteries cool down after charging. 

  Use the torch, battery pack and accessories only when diving. Using the products or other component parts for other purposes 

is not allowed.  

 

Содержание MAXI UNI









Отзывы: