TIL TDFM-7300-3, Инструкция по установке и эксплуатации

Страница: 25 / 51

TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-7300-3 Installation & Operating Instructions TiL 11RE436
2-10
FIGURE 2.5 USB to Serial Adaptor for Computers without Serial Ports
2.17 CONFIGURATION MENU:
Some features of the TDFM-7300-3 transceiver can be configured to the user’s preference. To
enter the configuration menu, turn the unit on while simultaneously pressing the F4, ESW and
TSW keys. Hold the keys until the display reads ‘Configuration Menu’. The following menu items
can be changed or modified. Rotate the knob to select the desired condition and press the knob
to continue to the next configuration item:
Knob default - This will select which mode (volume or channel) the knob will be when
the radio is first turned on.
Vol / Chan mode -
When set to both, volume and channel functions are both available
while if set to single, only the function set in the above knob default will
be available.
Numlock mode - When enabled, num lock mode is added to the available knob
functions.
Recall mode - When enabled, recall is added to the available knob functions.
Band 1 channels - This number should be set to the highest channel number programmed
in band 1 so that the channel scrolling wrap around will work properly
up and down.
Band 2 channels - This number should be set to the highest channel number programmed
in band 2 so that the channel scrolling wrap around will work properly
up and down.
Band 3 channels - This number should be set to the highest channel number programmed
in band 3 so that the channel scrolling wrap around will work properly
up and down.
Band 4 channels - This number should be set to the highest channel number programmed
in band 4 so that the channel scrolling wrap around will work properly
up and down.