M-Box NG User's Manual
English
4 / 40
tiko Energy Solutions AG
IM-0004-0001 Rev. 5
Features
M-Box features:
•
Communication gateway between devices of tiko installation and back-end pri-
vate cloud system:
o
To other devices: through power lines (PLC) or 868 MHz radio antenna
o
To back-end: private mobile connection (GSM) or internet over ether-
net network
•
status LEDs showing data connection and device errors
Package Content
Open the package and check that you have all the following items:
•
Instructions manual
•
M-Box (
IMAGE 1
)
•
Optional: LAN cable (
IMAGE 3
) in Kit
K01-GM-01.0005R06-CA-ETHC
If any of the parts are incorrect, missing or damaged, please contact the retailer where
you made your purchase. Keep the carton box, including the original packing materials, in
case you need to return the unit for repair.
Device
IMAGE 1
shows the device from the front side.
IMAGE 2
shows available variants of the
plug: Type 11, with Type F (Schuko) adapter and Type I (Australia/New Zealand).
On the rear side of the device a label is indicating
•
The manufacturer
•
The device model number (REF) and the current rating
•
The hardware (HW) and firmware (FW) version
•
The unique serial/MAC address as text and as Aztec 2D code (SN/MAC)
Installation
Installing the M-Box
Step 1
Plug the M-Box
into a free socket. Please see also section
Step 2
Optional (if connection to back-end via ethernet): Connect the LAN ca-
ble to your router (
IMAGE 5
).
Step 3
To
finalize the installation
, all tiko devices must be configured using the
installation app
.
