D-Box User's Manual
English
5 / 64
tiko Energy Solutions AG
IM-0007-0006 Rev. 5
Device: D-Box
IMAGE 1
and
IMAGE 2
show a D-Box from the plug side and from the button side. Your
D-Box may look differently, as for some electricity providers the D-Box comes in a cus-
tom design. (A) marks the location of the LED. It is hidden and only visible when on. (B)
marks the button.
On the bottom side, two labels are indicating
•
The manufacturer
•
The device model number (REF) and current rating
•
The hardware (HW) and firmware (FW) version
•
The unique serial/MAC address as text and as Aztec 2D code (SN/MAC)
Device: Socket
IMAGE 3
and
IMAGE 4
show the socket. It is connected to the electrical wiring of the
heater and offers a socket to plug the D-Box. It features 5 screw terminals for the con-
tacts and a strain relief.
On the top cover is indicated
•
The manufacturer
•
The device model number (REF) and current rating
Device: Continuity Bridge (Tap)
IMAGE 5
shows the continuity bridge. If a customer decides not to take part in the tiko
cloud, the D-Box can be removed from the socket and the continuity bridge is engaged
to restore the original contacts for manual operation of the electric heater.
Installation
Installation by person with electronical expertise and trained on this
product only!
Do not install the device unless you have removed the main power sup-
ply (main breaker or fuses)!
IMAGE 6 shows possible D-Box locations around the heater. The best
position is bottom left, right or center. Under no circumstances install
the D-Box above the heater. This will result in thermal issues and my
damage the device!
