tiki TC100ZW, Инструкция по эксплуатации

Страница: 10 / 36

10
EN
FLOOR - STANDING VERSION
Before connecting to the power supply network, install a power supply cord with a min. diameter of at least 1.5 mm
2
(H05VV - F 3G 1.5 mm
2
)
(applies to models without a connecting cable).
Connection must be carried out by a trained professional.
Figure 9b: Installing a power cord
CONNECTING AN EXTERNAL CIRCULATION PUMP, ELECTROMAGNETIC VALVE ETC.
The control unit automatically reports the requirement for flow rate in a branch of a heating circuit. The external element for enabling flow rate
is connected to a clamp (Fig. 10).
Maximum allowed power of elements for direct connection is 100 W (230 V). If the power of the element is higher, connection must
be made through a relay.
Connection should only be carried out by a trained person. Before connecting the element it is obligatory to disconnect the
appliance from power supply!
Figure 10: Connecting an external element
HEAT PUMP OPERATION
The heat pump can be operated using an LCD touch screen (Figure 11). Features and displays depend on the models.
Fig. 11: Control display
4
3
2
1
5
6 7 8 9 10 11
12
13
14
15
16 17 18 19 20
LEGEND
1
Indication, overview of errors, access to the user
menu
2
Signalisation of the operation of the heater,
Signalisation of the reserve mode
3 Signalisation of the operation of the compressor
4
Activation and setting of the "VACATION"
programme
5 Display of quantity of hot water
6
Activation of accelerated heating "TURBO",
activation of the "HOT" feature
7
Display of day of the week
(1.. Monday, …, 7.. Sunday)
8 Reducing the value
9 Heat pump ON/OFF switch
10 Increasing the value
11
Manual activation of the “ radiator heating ” feature,
activation of the “ automatic radiator heating ”
feature, activation of the “ radiator heating in timer
mode ” feature
12 Display and setting of temperature (°C/°F)
13 On/off "SMART" feature *
14 Signalisation of defrosting *
15
Signalisation of the operation of the anti - legionella
programme
16 Activation and setting of the timer
17 Display and setting of time
18 Indicator of operation in the Low tariff (LT) mode
19
Indicator of device ’ s connection to the WiFi
network *
20 Signalisation of the operation of the PV feature
* depending on the model