1
2008-E2
AMP2C
Amplifier Replacement
Versions 3.0 to 4.7
Fig. 1
Fig. 2
Description and Use
The amplifier (Figs. 1, 2), located inside the motor
box (Fig. 3), is the electronic device the drives all
TigerStop machines.
The procedure for removal and replacement of
the amplifier is simple to understand, easy to do.
The motor box is disassembled, the half that the
amplifier is mounted to is removed and replaced,
and the box is reassembled. As easy as that!
Fig. 3
Serial Number Information
AMP2C
starts with TigerStop serial number 982567.
Before the use of the internal line filter, an external line filter was sold with most machines.
AMP2C
with internal line filter starts with TigerStop serial number 0611226.
AMP2C
with internal line filter starts with TigerFence and TigerCrossCut serial number
0611027.
Your TigerStop serial number is stamped into the metal of the fence beam on the forward face
at the far end. You can also see the serial number on TigerStops version 3.5 or higher by
accessing the service menu.
Software Version and Level
…
Your TigerStop's software version and level are displayed at startup.
Tools Required
…
3/8" nut driver or socket wrench to remove and replace acorn nuts.
