TigerStop
LLC
Warranty Certificate
TigerStop System Products, TigerStop, TigerFence, TigerCrossCut, TigerRip Fence, Heavy Duty (HD2), TigerTurbo, TigerSaw, Accessory
Products and Spare Parts
LIMITED WARRANTY COVERAGE
All new TigerStop LLC machines warranted exclusively by the TigerStop LLC ("Manufacturer") limited warranty as follows: Each TigerStop LLC machine ("Machine") and its components
("Components") is warranted against defects in material and workmanship for a period of twelve (12) months from the date that a machine is enabled by the purchaser or the end user. In the event that
a machine is not put into use, enabled within thirty six (36) months from shipment date the warranty shall lapse. If the machine is enabled before thirty six months (36) and after thirty (30) months, the
warranty shall be in effect until thirty six (36) months from shipment date. Motors carry a warranty of twelve (12) months. Consumables, such as wear on painted surfaces, are not covered. One year
shall constitute a period of 365 days or the equivalent of 2080 hours of production use. The warranty shall be deemed to have elapsed if either the machine is 365 days from enablement or it has been
used for greater than 2080 hours, extended warranties notwithstanding. One (1) year extended warranties shall be subject to the same terms of duration as original Warranty. The foregoing is a limited
warranty and it is the only warranty by manufacturer. Manufacturer disclaims all other warranties, express or implied, including but not limited to all warranties of merchantability and fitness for a
particular purpose.
R
EPAIR OR REPLACEMENT ONLY: MANUFACTURER'S LIABILITY UNDER THIS AGREEMENT SHALL BE LIMITED TO REPAIRING OR REPLACING, AT THE
DISCRETION OF MANUFACTURER, PARTS, OR COMPONENTS.
An additional one-year warranty extension may be purchased from your authorized TigerStop LLC distributor.
LIMITS and EXCLUSIONS of WARRANTY
Except as provided above, buyer agrees that all warranties express or implied, as to any matter whatsoever, including but not limited to warranties of merchantability and fitness for a particular
purpose are excluded. Components subject to wear during normal use and over time such as paint, window finish and condition, light bulbs, seals, chip removal system etc., are excluded from this
warranty. Factory-specified maintenance procedures must be adhered to and recorded in order to maintain this warranty. This warranty is void if the machine is subjected to mishandling, misuse,
neglect, accident, improper installation, poor or improper power conditions, improper maintenance, or improper operation or application, or if the machine was improperly repaired or serviced by the
customer or by an unauthorized service technician.
Without limiting the generality of any of the exclusions or limitations described in other paragraphs, manufacturer's warranty does not include any warranty that the machine or components will meet buyer's production
specifications or other requirements, or that operation of the machine and components will be uninterrupted or error-free. Manufacturer assumes no responsibility with respect to the use of the Machine and Components by
Buyer, and manufacturer shall not incur any liability or Seller to Buyer for any failure in design, production, operation, performance or otherwise of the Machine or Components other than repair or replacement of same as set
forth in the Limited Warranty above. Manufacturer is not responsible for any damage to parts, machines, business premises or other property of Buyer, or for any other incidental or consequential damages that may be caused
by a malfunction of the Machine or Components.
Peripherals including, but not limited to, computers, printers, communication devices, touch screens and related products sold by TigerStop LLC are
warranted within the limitations of the original equipment manufacturer
’
s warranty. TigerStop LLC does not and cannot accept any responsibility or liability
for the condition, duration, or extent of such warranties. All customer questions and inquiries about warranties or repair should be directed to the original
equipment manufacturer.
ADDITIONAL WARRANTY (SYSTEM PRODUCTS EXCLUSIVELY)
System Products carry a twelve (12) months labor and parts warranty, FOB Vancouver, WA. In the event that a service technician is required to make repairs at customer
’
s place of business, then
buyer agrees to prepay all travel costs and to provide prepaid ticket and rental car for a TigerStop LLC technician along with all other expenses incurred by technician. All other terms apply of the
warranty certificate. Purchaser agrees that any other technical service provided by a third party is not covered under this warranty.
SPARE PARTS WARRANTY EXCLUSION
Spare parts are warranted for a period of thirty (30) days from shipment date. All other terms of this warranty apply.
LIMITATION OF LIABILITY AND DAMAGES: MANUFACTURER IS NOT LIABLE TO BUYER, SELLER OR ANY CUSTOMER OF BUYER FOR LOSS OF PROFITS,
LOST DATA, LOST PRODUCTS, LOSS OF REVENUE, LOSS OF USE, COST OF DOWNTIME, BUSINESS GOOD WILL, OR ANY OTHER INCIDENTAL OR
CONSEQUENTIAL DAMAGE, WHETHER IN AN ACTION IN CONTRACT OR TORT, ARISING OUT OF OR RELATED TO THE MACHINE OR COMPONENTS,
OTHER PRODUCTS OR SERVICES PROVIDED BY MANUFACTURER OR SELLER, OR THE FAILURE OF PARTS OR PRODUCTS MADE BY USING THE
MACHINE OR COMPONENTS, EVEN IF MANUFACTURER OR SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. MANUFACTURER'S
LIABILITY FOR DAMAGES FOR ANY CAUSE WHATSOEVER SHALL BE LIMITED TO REPAIR OR REPLACEMENT, AT THE DISCRETION OF
MANUFACTURER, OF THE DEFECTIVE PARTS, COMPONENTS OR MACHINE.
Buyer has accepted this restriction on its right to recover incidental or consequential damages as part of its bargain with Seller. Buyer realizes and acknowledges that the price of the equipment would
be higher if Seller or Manufacturer were required to be responsible for incidental or consequential damages, or punitive damages.
This Warranty Certificate supersedes any and all other agreements, either oral or in this writing, between the parties hereto with respect to the warranties, limitations of liability and/or damages
regarding the Machine or Components, and contains all of the covenants and agreements between the parties with respect to such warranties, liability limitations and/or damages. Each party to this
Warranty Certificate acknowledges that no representations, inducements, promises, or agreements, orally or otherwise, have been made by any party, or anyone acting on behalf of any party, which
are not embodied herein regarding such warranties, liability limitations and/or damages, and that no other agreement, statement, or promise not contained in this Warranty Certificate shall be valid or
binding regarding such warranties, liability limitations and damages.
WARNING: TigerStop, TigerFence, TigerCrossCut, TigerRip Fence, Heavy Duty (HD2) and TigerTurbo are machine components intended for use in conjunction with other potentially dangerous machinery.
The use of these components does not make that machinery safe. TigerStop LLC
’
s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other
machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law
with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerStop Heavy Duty 2 (HD2) and TigerTurbo are machine components that should only be operated by qualified persons
trained in safe operating procedures. Illustrations of TigerStop, TigerStop Heavy Duty 2 (HD2) and TigerTurbo components in use do not show, and are not intended to show, safety features necessary to make
the machinery safe to operate.
TRANSFERABILITY
This warranty is not transferable from the original registered owner to any other party.
Limit of Liability
All rights reserved. The information contained in the TigerStop Manual has been validated and reviewed for accuracy. No patent liability is assumed with respect to the use of the information contained herein. While every
precaution has been taken in the preparation of this manual, the manufacturer assumes no responsibility for errors or omissions.
Copyright
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of
the manufacturer.
Trademark
TigerStop
®
is a registered trademark of TigerStop LLC.
These specifications are subject to change without notice. (Rev.4: 8/15/2008)
