Tiger WILDCAT JD6105D, Монтаж и эксплуатация

Страница: 43 / 252

ASSEMBLY
Assembly Section 2-11
ELECTRONIC LIFT VALVE PORTS
(ASM-C-0089)
VALVE MOUNTING
Attach the rear valve mounting bracket to the fender of the tractor by removing the
two rear bolts on the left fender and the two rear bolts on the right fender. See illustration
below. Drill the square holes in the fenders to accept 3/8” capscrews. Use the hardware
noted in the Parts Section to attach the valve mounting bracket to the tractor.
Next, attach the valve mounting plate to the mounting bracket. Align the holes on the plate
to the holes on the bracket. Use the hardware shown in the Parts Section to attach the plate to
the valve mounting bracket. Finally, place the valve on the valve mounting plate as shown in the
Parts Section. Align the holes on the valve assembly to the holes in the plate. Use the hardware
provided to secure the valve to the plate. Refer to the Parts Section for the placement of the
valve and the hardware used.
Please handle the lift valve with care. It is extremely heavy
and contains small parts.
(ASM-JD-0065)