Tiger TI-02 Скачать руководство пользователя

Страница: 12 / 13

@TI-02 USER MANUAL

2. Press the or key to select

ECF-1

ECF-2

ECF-3

ECF-1

Zero and Span Calibration

1. Press the key to enter, display will show

cALZ

2. Press the key to calibrate zero point.

3. The display will show the calibration weight

00.6.000

4. Use the keys and to select the digit,press key to input the

weight value.

5. Put the calibration weight on the platter and press the key to calibrate.

The scale will return back to weighing mode automatically.

ECF-2

Zero Calibration

1. Press the key to enter, display will show

cALZ

2. Press the key to calibrate zero point.

3. The scale will return back to weighing mode automatically.

ECF-3

Span Calibration

1. Press the key to enter, display will show the calibration weight

00.6.000

2. Use the keys and to select the digit,press key to input the

weight value.

3. Put the calibration weight on the platter and press the key to calibrate.

The scale will return back to weighing mode automatically.

GUARANTEE

This scale is guaranteed for one year from the delivery date. The guarantee covers any
fabrication defect of the material.

Содержание TI-02














Результаты поиска

Содержание TI-02

Отзывы:

Похожие инструкции для TI-02

Бренды по названию

Популярные бренды

Tiger TI-02, Руководство пользователя

Результаты поиска

Содержание TI-02

Отзывы:

Похожие инструкции для TI-02

Бренды по названию

Популярные бренды