Tiger Box 4U24 Assembly Guide
Site Installation: Cabling Tiger Box
10
•
Plug other end of the network cable in the port of the network card of the client
computer.
•
Plug other end of the network cable in the port of the Ethernet switch and then
connect the switch to the client computer's network port.
Note:
If you opt for interconnection via switch, refer to your switch documentation
for further setup instructions.
To connect a LAN computer via 10GbE port:
Note:
Your Tiger Box shipment does not include copper and fiber-optic cables.
1.
Plug one end of the cable into the 10GbE port of the appliance.
2.
Do one of the following:
•
Plug other end of the cable in the 10GbE port of the client computer.
•
Plug other end of the cable in the 10GbE port of the Ethernet switch and then
connect the switch to the client computer's 10GbE port.
Note:
If you opt for interconnection via switch, refer to your switch documentation
for further setup instructions.
To connect a LAN computer via 1GbE port:
Note:
Your Tiger Box shipment does not include twisted pair cables.
1.
Plug one end of the cable into the network port of the appliance.
2.
Do one of the following:
•
Plug other end of the cable in the network port of the client computer.
•
Plug other end of the cable in the port of the Ethernet switch and then connect the
switch to the client computer's network port.
Note:
If you opt for interconnection via switch, refer to your switch documentation
for further setup instructions.
