Tiffin Motorhomes WAYFARER 2021, Руководство пользователя

Страница: 115 / 170

PLUMBING AND BATH FEATURES CONTINUED
WATER PUMP CONTINUED
If water does not flow when a faucet is turned "ON" while using the demand system, use the
following troubleshooting chart:
SITUATION SOLUTION
Pump running - no water 1. Fill tank
Pump doesn't run 2. Clear the water line to the pump
3. Check the pump switch
4. Check the 12-volt fuses
5. Check the electrical connections
6. Check the motorhome battery
CITY WATER CONNECTIONS
When connecting your motorhome to city water,
use a water hose manufactured and labeled for
potable water service. This will assure the the
hose selected will not alter the taste of your water.
When connecting your motorhome to city water,
connect your hose to water connection marked
with a red arrow (Figure 107.1). While doing so,
make sure the blue handle located to the left of the
inlet is moved to "CITY".
DRY CAMPING CONNECTIONS
When dry camping, make sure the blue handle
next to the inlets is turned to "DRY" and the water
pump switch is turned "ON".
HOOKING UP TO WINTERIZATION
1. Take plug out located at the end of hose #2
as noted with blue arrow (Figure 107.2).
2. Insert the winterization hose.
3. Turn the blue handle to "CITY".
4. Switch water pump to the "ON position.
Figure 107.1
City Water Intake Marked with Red Arrow and Blue
Handle Turned to City
Figure 107.2
Remove Plug Marked with Blue Arrow to Insert
Winterization Hose
107